TFTP (Trivial File Transfer Protocol) is a simplified version of FTP (File Transfer Protocol). It was designed to be easy and simple. TFTP leaves out many authentication features of FTP and it runs on UDP port 69. As it is very lightweight, it is still used for different purposes.

TFTP is used in places where you don’t need much security. Instead, you need a way to easily upload files to and download files from the server. CISCO devices use TFTP protocol to store configuration files and CISCO IOS images for backup purposes. The network boot protocols such as BOOTP, PXE etc uses TFTP to boot operating systems over the network. Thin clients also use TFTP protocol for booting operating systems. Many electronics circuit boards, microprocessors also use TFTP to download firmware into the chip. Overall, TFTP has many uses even today.

In this article, I am going to show you how to install and configure TFTP server on Ubuntu. So, let’s get started.

Installing TFTP Server:

In this article, I am going to install the tftpd-hpa TFTP server package on Ubuntu (Ubuntu 19.04 in my case). The package tftpd-hpa is available in the official package repository of Ubuntu. So, you can easily install it with the APT package manager.

First, update the APT package repository cache with the following command:

$ sudo apt update

The APT package repository cache should be updated.

Now, install the tftpd-hpa package with the following command:

$ sudo apt install tftpd-hpa

tftpd-hpa package should be installed.

Now, check whether the tftpd-hpa service is running with the following command:

$ sudo systemctl status tftpd-hpa

The tftpd-hpa service is running. So, TFTP server is working just fine. In the next section, I will show you how to configure it.

Configuring TFTP Server:

The default configuration file of tftpd-hpa server is /etc/default/tftpd-hpa. If you want to configure the TFTP server, then you have to modify this configuration file and restart the tftpd-hpa service afterword.

To modify the /etc/default/tftpd-hpa configuration file, run the following command:

$ sudo nano /etc/default/tftpd-hpa

The configuration file should be opened for editing. This is the default configuration of the TFTP server.

Here, TFTP_USERNAME is set to tftp. It means the TFTP server will run as the user tftp.

TFTP_DIRECTORY is set to /var/lib/tftpboot. It means /var/lib/tftpboot is the directory on this server which you will be able to accessing via TFTP.

TFTP_ADDRESS is set to :69. It means TFTP will run on port 69.

TFTP_OPTIONS is set to –secure. This variable sets the TFTP options. There are many options that you can use to configure how the TFTP server will behave. I will talk about some of them later. The –secure option means change the TFTP directory to what is set on the TFTP_DIRECTORY variable when you connect to the TFTP server automatically. This is a security feature. If you hadn’t set the –secure option, then you would have to connect to the TFTP server and set the directory manually. Which is a lot of hassle and very insecure.

Now, I only want to change the TFTP_DIRECTORY to /tftp and add the –create option to the TFTP_OPTIONS. Without the –create option, you won’t be able to create or upload new files to the TFTP server. You will only be able to update existing files. So, I think the –create option is very important.

The final configuration file should look as follows. Now, press + x followed by y and then to save the changes.

Now, you have to create a new directory /tftp. To do that, run the following command:

$ sudo mkdir /tftp

Now, change the owner and group of the /tftp directory to tftp with the following command:

$ sudo chown tftp:tftp /tftp

Now, restart the tftpd-hpa service with the following command:

$ sudo systemctl restart tftpd-hpa

Now, check whether the tftpd-hpa service is running with the following command:

$ sudo systemctl status tftpd-hpa

As you can see, the tftpd-hpa service is running. So, the configuration is successful.

Testing TFTP Server:

Now, to access the TFTP server, you need a TFTP client program. There are many TFTP client programs out there. You most likely will not need one other than for testing the TFTP server because the devices that will use the TFTP server will have the client program already installed on it. For example, CISCO routers and switches already have a TFTP client program installed.

For testing, I am going to use the tftp-hpa TFTP client in this article. I am going to upload an ISO image to the TFTP server and retrieve it later just to verify whether the TFTP server is working as expected.

To install the tftp-hpa TFTP client on Ubuntu, run the following commands: